Basket installation steps;
Step 1: Fix the side plate and the lower plate
Step 2:Fix the side plate and upper layer plate
Step 3: Connect the other side plate
Step 4 : Fix the lower tie rod
Step 5: Use the positioning template to determine the fixed position of the elevator
Step 6: Fix one side of the elevator
Step 7: Fix the other side of the elevator
Step 8: Fix the linkage rod with the elevators on both sides
Step 9: Fix the fixed plate of the elevator and the side plate of the basket
Step 10: Test whether the lifting is normal and the installation is completed.

Note:
1.The corresponding positions of fixing points on both sides of the elevator are consistent
2.After installing the elevators on both sides, test whether the elevators return normally
3.The linkage rod does not need to be fit to the elevator. fixed firmly it is ok.
4.The elevator wll automatically return to its original position when it is unloaded. When the load is about 2-5kg, it can stop at any time(depending on the load and size, the effect will be different)

Tips:
Steps 1 to 3 use M4x6 screws to connect with M4 nuts,25pcs in total.
Step 4 Use M6X10 screws to fix the lower tie rod,2pcs in total
Steps 5 to 7 use 4x14 self tapping screws,1Opcs in total
Step 8: Connect with m5x8 screws,4pcs in total
Step 9 Use m5 screws to connect 4 on the left and 4 on the right, 8pcs in total